Model 6432e Point of Use Ionizing Blower

ファイルをダウンロード 製品のお問い合わせ
Simco-Ion's Point of Use Ionizing Blower Model 6432e controls static discharge in assembly, inspection, and packaging areas. The Model 6432e can also be used in-tool to control static build-up problems such as product contamination, material mis-handling or microprocessor lock-up.

lsoStat technology provides several useful benefits for the 6432e blower. It's small size and ability to operate in balance without grounding wires or cables allows easy and quick installation and setup. The blower's internal emitter points are electrostatically shielded to eliminate field-induced charging. Steady State DC operation provides fast discharge with low airflow for greater operator comfort.



Features:

  • lsoStat® technology
  • Steady-state DC ion emission
  • 24 VDC or 24 VAC input power
  • Facility Monitoring System (FMS) interface
  • Operational failure alarm
  • Small footprint design with in-tool stand or benchtop stand



Benefits:

  • Intrinsically balanced; no calibration needed
  • Minimum ion recombination provides maximum static control
  • Convenient power options, wall-provided AC or tool-provided DC
  • Faster response to ionization failure
  • Provides visual notification of failures
  • Occupies little work or tool space, and cleanroom-compatible.



Typical Decay Time (sec)

  

Specifications:

6432e
 Input Voltage  24 VDC or 24 VAC, 50/60 Hz, 6 W max
 Decay Time 1  <4 s @ (1000 V to 100 V, 30cm, 24 VAC input
 Balance  ± 20 V @ 30cm
 Technology  Steady-state DC
 Emitter  Tungsten; internally shielded
 Cleanroom Class  ISO 14644-1 Class 5
 Indicators  Power - Green; Fault - Red alarm
 Connections  Terminal block for power and FMS fault signal output
 Airflow (m3/min)  1.39 (typ)
 Ozone  <0.005 ppm (typ)
 Operating Env.  10 - 35ºC, 20-60% RH (non-condensing)
 Mounting  U-bracket : in-tool (4.5 x 12.9cm), benchtop (10.8 x 12.9cm)
 Dimensions  13.3H x 12.7W x 6.3D cm; Base (in-tool 4.5cm, benchtop 10.8cm)
 Weight  With benchtop bracket 0.595 kg
 Certifications  


Enhanced Features



An alarm LED on the front indicates a high voltage circuitry failure and a five-pin facility monitoring system (FMS) interface is on the rear of the blower, which provides a 4 - 20 mA current loop and relay output connection. With 24 VDC input connection, the FMS output is situated on a convenient terminal block, designed for easy integration.

Power Options

For increased flexibility, the Model 6432e Blower can be directly powered by process equipment or 24 VDC or 24 VAC power to fit the needs.