Cyber Jet

Rapid jet with no bubble, no dispersing

  • Its high speed flies about 133 dps the low viscosity fluid.
  • High maintenance is achieved
  • Excellent quiet operation
  • Improvement of continuous dispensing stability
  • Temperature controller system as standard equipment

Specifications

Model MJET-C-HU

⃝-R/L

Dispensing method
Jet type
Application liquid medicine
Flux, Moisture proof insulant fluid, UV resin, etc.
Viscosity of application liquid medicine
1 to 2,000mPa-s
Use nozzle
Pipe type ( 1L,2L, 3L ) : 15 to 32G
Pipe type ( 1L,2L, 3L ) : 15 to 28G
Teflon coating
All-in-one (SHN) : 28 TO 36G
Supply air pressure
Max 0.5MPa

Controller's Department  *Common in Aero Jet and Cyber Jet
Model MJET-3-CTR
Control scheme Electro / pneumatic method
Pressure setting 0.005 to 0.700MPa
Control circuit of 
dispensing time
Digital timer circuit 
Setting at 
dispersing time
 
Dot mode 0.01 to 99.99msec  
Line mode Turning on time : 0.01 to 99.99msec 
Turning off time : 0.01 to 99.99msec.
Dispensing frequency setting function  1 to 9999 times ( At the line mode ) 
Display section  LED digital presentation 
I/O signal  Input (4Pin {connector} : 
No point of contact or having 
point of contact signal
(terminal I/O : No point of contact) 
Dispensing signal
Mode switch signal 
Output (non-contact point)
Dispensing completion signal, signal under
dispensing, power supply ON signal, 
the main mode state signal, pressure decrease signal  
Supply pressure 0.80MPa or less 
Power supply /
Power consumption

AC100 to 240V  50/60Hz • 62W
Weight 4Kg